Inner tube for all terrain skateboard wheels
We have 6", 7", 8" and 9" inflatable inner tubes to cover all your electric skateboard wheel requirements. These tubes are durable, reliable and cost effective.
7" tubes has been designed to work with 175mm x 50mm tyres (Like Evolve 7" smooth or knobby).
6" tubes work with 150mm x 50mm tyres. (like Evolve 6" AT kit)
8" tubes are for all 200 x 50 tyres.(Like the MBS 8" T3 tyres Green, Red, Yellow & Purple or the Kenda 8inch)
9" tubes are for MBS 9 inch tyres or other 280 x 240 tyres
To replace the inner tube on your skateboard, remove the wheel from the skateboard, deflate the tube you are replacing, unscrew the split hubs so they come apart in 2 pieces, take the old tube out and put the new tube in it’s place, pump a bit of air in the tube so that when placing the hubs back you don't pinch the tube and cause it to puncher again. Screw the hub back together with the tyre already in place. Then inflate the inner tube once everything is screwed back together.
All tubes have the standard Schrader valve, the same as most bike and car tyre valves.
Pricing is per tube.
Side note: Some people spell tyre as tire. Tire is the US English. Tyre is UK English.